Washing & Care Instructions

🧼 X-TIGER Washing & Care Instructions

 

Proper care ensures your X-TIGER gear maintains its performance, fit, and longevity. Please follow these guidelines for each product category.

 

I. Cycling Apparel (Jerseys, Bib Shorts, Jackets)

Instruction	Details & Rationale
1. Pre-Wash Preparation	Empty all jersey pockets and close all zippers and Velcro fasteners. Turn the garment inside out (especially bib shorts)—this protects the exterior fabric, graphics, and, most importantly, the chamois (padding).
2. Washing Cycle	Machine wash cold (Max 30°C / 86°F) on a Delicate or Gentle cycle. Hot water can damage the elastic fibers, waterproof coatings, and heat-pressed logos.
3. Detergent	Use a mild, non-biological liquid detergent.
4. What to AVOID	NEVER use fabric softener, bleach, or harsh stain removers. Fabric softener coats the fibers, destroying the fabric's essential moisture-wicking and breathability properties.
5. Drying	DO NOT Tumble Dry. High heat will break down the Lycra/Spandex and adhesives. Hang the garment to air dry in a cool, well-ventilated area, away from direct sunlight.
6. Stains	Pre-treat stubborn stains (like chain grease) with a small amount of mild liquid detergent or specialized outdoor gear cleaner before washing.

 

II. Cycling Accessories (Sunglasses, Gloves, Caps)

Product	Washing / Care Instructions
Cycling Sunglasses	Lenses: Rinse with lukewarm water to remove dirt before wiping. Clean gently with a mild soap and water solution. NEVER use chemical solvents, alcohol, or ammonia-based cleaners. Dry with the provided microfiber cloth only—avoid paper towels or rough fabrics, which can scratch the lens coating.
Cycling Gloves	Washing: Close the Velcro wrist straps. Machine wash with your apparel on a gentle cycle, or hand wash. Drying: Air dry only. Do not wring or twist.
Cycling Caps / Headwear	Hand wash with cold water and mild detergent. Air dry flat to help maintain the shape.
Socks	Machine wash cold and air dry or tumble dry low.

 

III. Cycling Equipment (Helmets & Shoes)

Product	Cleaning Instructions
Cycling Helmet	Shell/Exterior: Wipe the exterior with a cloth dampened with mild soap and water. Interior/Pads: Removable pads can usually be hand-washed with mild soap. Non-removable interior surfaces should be wiped down with a damp cloth. DO NOT use strong chemical cleaners, which can damage the foam (EPS) structure.
Cycling Shoes (General)	Exterior: Wipe off mud and dirt with a damp cloth immediately after a ride. Drying: Remove insoles and allow the shoes to air dry in a cool, dry place. NEVER dry shoes by placing them near a heater or in direct sun, as this can crack the material or damage the sole structure.
Bike Lights & Electronics	Always check the product's IP waterproof rating before cleaning. Use a damp cloth to wipe the body. DO NOT submerge the light. Ensure the charging port is closed with its rubber seal when not charging.